Bhuwal Insulation Cable Pvt. Ltd. is a leading PTFE Sleeve manufacturer and supplier in India & able to supply you with a great range of cable sleeving including cable heatshrink, PVC and silicone glass sleeving all competitively priced and ready to be delivered wherever you need it.
We stock a complete range of sleeving including PVC and Halogen Free, PTFE Sleeve, Easi Zip, Spiral Binding, Polyester Braided Sleeving, Neoprene Sleeving, Electrical Cable Sleeves, Heat Shrink Sleeve, Elastomeric Sleeve, Silicone Sleeve / Silicone Tube, PTFE Sleeve, Rubber Sleeve, Silicone Fg Sleeve / Silicone Fiberglass Sleeve / FG Silicone Sleeve / Fg Sleeve, Fiberglass Sleeve Manufacturer India, Fiberglass Sleeve Insulation, Fiberglass Sleeve Manufacturers, Heat Resistant Sleeve, Fiberglass Sleeve, Teflon Sleeve Manufacturer / Teflon Cable Sleeve, Braided Fiberglass Sleeve, High Temperature Cable Sleeve and tools. We also supply new range of High temperature sleeving for demanding applications.
1. Superior endurance in corrosion
2. Non-flammable, limited oxygen index is under 90
3. Low friction coefficient, Low permeability , Good gas barrier property
4. Non-viscous, Self-lubricating
5. Superior endurance in high & low temperature, can be used at -200~260°C
NO. |
Item Unit |
Data |
|||
|---|---|---|---|---|---|
1 |
Special gravity |
g/cm² |
2.10~2.30 51~60 |
||
2 |
Hardness |
shore D |
|||
3 |
Tensile strength |
Mpa |
≥15 |
||
4 |
Ultimate elongation |
% |
15 |
||
5 |
Working temperature |
°C |
-180~+260 |
||
6 |
Melting point |
°C |
327 |
||
7 |
Yield strength |
Mpa |
23 |
||
8 |
Density |
kg/m³ |
2200 |
||
9 |
Coefficient of friction |
/ |
0.10 |
||
Diameter (mm) |
Tolerance (mm) |
Length (mm) |
Tolerance (mm) |
|---|---|---|---|
φ4-φ9 |
+0.45 |
1000 |
+5.0 |
Φ10-φ18 |
+0.98 |
1000 |
+5.0 |
Φ20-φ50 |
+1.50 |
1000 |
+3.0 |
Φ55-φ150 |
+2.00 |
1000 |
+3.0 |
Diameter (mm) |
Tolerance (mm) |
Length (mm) |
Tolerance (mm) |
|---|---|---|---|
Φ4-φ15 |
+0.20 |
120 |
±2.0 |
Φ15-φ90 |
+0.20 |
300 |
±2.0 |
Φ90-φ150 |
+0.30 |
300 |
±2.0 |
Φ150-φ350 |
+0.30 |
200 |
±2.0 |
PTFE Sleeve Technical Data
| Properties | Typical Data | Test Method |
|---|---|---|
Tensile strength |
≥10.4MPa |
ASTM D 2671 |
Elongation |
≥200% |
ASTM D 2671 |
Tensile strength after heat |
≥7.3MPa |
158℃×168h |
Elongation after aging |
≥100% |
158℃×168h |
Longitudinal change |
-5%~+5% |
ASTM D 2671 |
Flammability |
VW-1 |
ASTM D 2671 C |
Voltage withstand (Rated voltage, 600V) |
2500V,1min without breakdown |
UL 224 |
Heat shock |
No track ,no drippings |
UL 224,250℃×4h |
Dielectric strength |
≥15kV/mm |
ASTM D 149 |
Volume resistivity |
≥1014Ω.cm |
IEC 60093 |
Item No. (mm) |
Actual Size (mm) |
Flat width (mm) |
Length per roll (m/set) |
Weight per meter (kg) |
|---|---|---|---|---|
φ1 |
1.5±0.2 |
/ |
200 |
0.5 |
φ2 |
2.5±0.2 |
/ |
200 |
0.7 |
φ2.5 |
3.0±0.2 |
/ |
200 |
0.85 |
Φ3 |
3.5±0.2 |
/ |
200 |
0.9 |
φ3.5 |
4.0±0.3 |
/ |
200 |
1.05 |
φ4 |
4.5±0.3 |
/ |
200 |
1.2 |
φ5 |
5.5±0.4 |
/ |
200 |
1.2 |
φ6 |
6.5±0.4 |
/ |
100 |
1.1 |
φ8 |
8.5±0.5 |
14 |
100 |
0.9 |
φ10 |
10.5±0.5 |
16 |
100 |
1.1 |
φ12 |
12.5±0.5 |
20 |
100 |
1.2 |
φ14 |
14.5±0.5 |
23 |
100 |
1.5 |
φ16 |
16.5±0.5 |
26 |
100 |
1.9 |
φ18 |
19.0±0.5 |
30 |
100 |
2 |
φ20 |
21.0±0.5 |
32 |
100 |
2.4 |
φ22 |
23.0±0.5 |
35 |
100 |
2.5 |
φ25 |
26.0±0.5 |
43 |
25 |
0.9 |
φ30 |
31.5±0.5 |
50 |
25 |
1.06 |
φ35 |
36.5±1.0 |
55 |
25 |
1.2 |
φ40 |
41.5±1.0 |
64 |
25 |
1.5 |
φ50 |
≥50 |
80 |
25 |
1.85 |
PTFE Sleeve Approved by |
|||
|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
PTFE Sleeve are Non-adhesive, printable wire marker sleeves and cable heat shrink sleeves fit snugly around wires or cables for maximum insulation protection and permanent identification. Full-circle design provides fast, permanent wire marking. High-Quality Wire and cable marking sleeves and cable heat shrink sleeves for maximum insulation and identification.
PTFE Sleeve can be widely used in the insulation protection of internal line in H&N machinery, household electrical appliances, electroheat and special illuminations.
