Contents:
Manufacturers and Compensating Cables suppliers for a wide range of high quality LSOH Flame Retardant Thermocouple Compensation Cable to suit all kinds of applications. It is commonly the case that Braided Fiberglass thermocouple compensated cable type k are required quickly and in small quantities. We use the latest technology available in our industry for the manufacturing of all Flat Traveling Cable for Elevator which are now lighter, more durable and more flexible.
Compensating cables are indispensable for precise temp. measurement at remote measurement points, they serve as extension leads from the thermocouple sensor to the measuring instrument. Compensating cables are made from metallic materials.
PVC Sheath
PVC insulation sheath has been widely used as a good substitute for rubber insulator. At Bhuwal Insulation Cable, PVC is used as an insulating material of standard compensating cables for general use.
Recommended Temperature Range: -20˜+90˚C
Glass Fiber Sheath
Glass fiber is known as a traditional high temperature insulation material because it has excellent incombustibility, heat resistance, electric insulation, and chemical stability.
Recommended Temperature Range: 0˜150˚C
Silicon Rubber Sheath
Silicon rubber has almost same electric properties as natural rubber and no serious change in voltage withstanding value occur over recommended temperature range. Recommended Temperature Range: -25˜+180˚C
Teflon* Cover
Teflon is the best insulation material among organic materials in respect of heat resistance, chemical Resistance, electrical insulation, high frequency resistance, weather resistance, etc. high mechanical strength and, especially, high pressure resistance over wider range of operating temperatures. Recommended Temperature Range: -25˜+200˚C. *Teflon is the registered trade mark by DuPont, U.S.A.
Metal Sheathed Compacted Mineral Insulation
The insulation material is fine grain MgO which is similar insulant to Metal Sheathed Thermocouples. Inorganic ceramic powder insulation tightly holds extension or compensating wires inside the Metal Sheath, composing perfectly integral construction. Temperature Range: 20˜270˚C but the cable withstands high temperatures up to 900˚C. Recommended for wiring at hazardous location without conduit tube.
Maximum Length of compensating cable
Many factors can affect the usable length of a thermocouple. As a guideline, under 100 feet with 20 AWG or thicker wire in an area free of electromagnetic interference usually is fine.
1.Product Introduction of thermocouple wire type k
1. Thermocouple level (high temperature level). This type of thermocouple wire is mainly suitable for thermocouple type K, J, E, T, N and L and other high temperature detection instrument, temperature sensor, etc.
2. Compensating wire level (low temperature level). This type of thermocouple wire is mainly suitable for compensating cable and extension wire of various thermocouples of type S, R, B, K, E, J, T, N and L, heating cable, control cable and so on.
Product Specifications
Anode |
Cathode |
Diameter(mm) |
Maximum Temperature(°C) |
|||
|---|---|---|---|---|---|---|
name |
code |
name |
code |
long-time using |
short-time using |
|
NiCr10(Chromel) |
KP |
NiSi3(Alumel) |
KN |
Φ0.3 |
700 |
800 |
Φ0.5 |
800 |
900 |
||||
Φ0.8 Φ1.0 |
900 |
1000 |
||||
Φ1.2 Φ1.6 |
1000 |
1100 |
||||
Φ2.0 Φ2.5 |
1100 |
1200 |
||||
NiCr14.2Si |
NP |
NiSi4 |
NN |
Φ3.2 |
1200 |
1300 |
NiCr10(Chromel) |
EP |
CuNi45(Copel) |
EN |
Φ0.3 Φ0.5 |
350 |
450 |
Φ0.8 Φ1.0 Φ1.2 |
450 |
550 |
||||
Φ1.6 Φ2.0 |
550 |
650 |
||||
Φ2.5 |
650 |
750 |
||||
Φ3.2 |
750 |
900 |
||||
Fe(Iron) |
JP |
CuNi45(Copel) |
JN |
Φ0.3 Φ0.5 |
300 |
400 |
Φ0.8 Φ1.0 Φ1.2 |
400 |
500 |
||||
Φ1.6 Φ2.0 |
500 |
600 |
||||
Φ2.5 Φ3.2 |
600 |
750 |
||||
Cu(Copper) |
TP |
CuNi45(Copel) |
TN |
Φ0.2 Φ0.3 |
150 |
200 |
Φ0.5 Φ0.8 |
200 |
250 |
||||
Φ1.0 Φ1.2 |
250 |
300 |
||||
Φ1.6 Φ2.0 |
300 |
350 |
||||
Product Name |
OEM Heat resistant electrical compensating cable |
||
Conductor |
Copper |
||
Length of Roll |
200m (Customized) |
||
Insulation |
FEP Teflon |
||
Capacity of Production |
50,000m/week |
||
Brand |
OEM |
||
OEM |
Accept |
||
Sample Time |
1 day
3-7 days if the products are customized
|
||
| Compensating Cables Specification | |
|---|---|
| Extreme temperature range: |
(-40oC to 105oC) can withstand the extremes of automotive environments |
| Compensating Cables range: | 0GA, 2GA, 4GA, 6GA, 8GA, 10GA, 12GA, 14GA, 15GA, 16GA, 18GA, 20GA and ultra classic strands |
| High strand counts | High strand counts |
| Conductor Type | Stranded 99.99% OFC (oxygen free copper), and tin plated copper,copper coated al |
| Material | Environmentally friendly, quality, glossy material Tinned, Silver or Nickel plated copper etc. |
| Compensating Cables Colour: | Customized |
| Packing | carton packing, pallet packing , wooden / plastic reels |
| We can manufacture Compensating Cables as per customers' requirement. | |
Compensating Cables Approved by |
|||
|---|---|---|---|
 |
 |
 |
 |
 |
 |
 |
 |
We produce Compensating Cables & industrial electrical cable & wires for:
